• "DA-Retro Kit Boards"
  • "DA-Retro Kit Boards"
  • "DA-Retro Kit Boards"

SNES Guides

**Before you start soldering, turn the console on without the power cord**
You will see the power led flash, this will discharge any power in the capacitors, if you do not do this you could blow the consoles internal fuse

You can find a quick reference video on Youtube that shows the main steps including a method for removing the original cic chip. See Below

Step by Step Guide for V1.1 chip this also applies to the V2

SNES Quick Guide

Below is the LED leg details

Longest leg is Ground
Shortest leg is Blue
Last leg is Red